Welcome to Qihui Beverage Filling Machinery website.

+86 15838835100 whq@qihuicb.com RussianRussian

News  |   Beverage Equipment Information

How to Adjust the Inaccuracy of Beverage Filling Machine?

How to Adjust the Inaccuracy of Beverage Filling Machine?

How to Adjust the Inaccuracy of Beverage Filling Machine
1. Look at whether the speed of the beverage filling machine is too fast. Adjust the filling speed of the throttle valve and reduce the filling speed.
2. Note that if all sealing rings are damaged and replace new sealing rings in time.
3. Magnetic switches should also be checked to see if they are loose. Lock tightly after each adjustment.

4. See again whether the beverage filling machine clamp sand leather pipe buckle can seal well, if not, please correct.
5. Check whether the throttle valve is closed.Speed throttle valve and filling interval throttle valve can not be closed.
6. Install the three-way control valve if there is foreign body or air to clear .

7.Whether the filling mouth valve core has a clamping appearance or delayed opening. If there is a clamping, install the valve core in position from the beginning. If delayed opening, need to adjust thin cylinder throttle valve.
8. Fast-fit three-way control valve in the upper and lower tightening of the spring elastic, elastic large check valve will not open.



Online Message